Panasonic KX-TD1232, User Manual

Page: 161 / 226

5-10 DECT Portable Station
Operation
Calling an external party
You have to seize an outside line before dialling an outside phone number because external calls are
made via your system.
Select one of the following methods:
• Press an idle button.
• Dial automatic line access number .
An idle line is selected automatically.
• Dial outside line number to .
A specific line is selected.
◆
Using a Flexible CO button
◆
Using automatic line access number / outside line number
TUV TUV TUV
WXYZ
F1-F3
(CO)
• You can also finish the conversation by placing the PS
on the charger or pressing TALK button.
• If “ ” flashes, move towards the Cell Station until the
sign stops flashing and try again.
• Emergency call
You can dial pre-programmed emergency numbers
without any restrictions.
(Default: 999, 112)
Customising Your PS
• PBX Programming – Customising the Buttons
Create or re-arrange the Loop-CO button, Group-CO
button and Single-CO button.
PT and SLT PS
Talk. Enter phone number . Press CO .
Press CANCEL .
C
phone no. phone no.
F1-F3
(CO)
PS
Talk. Enter phone number . Press CANCEL .
C
Seize an external line
(9 or 81-88).
phone no.
to
OR
TUV
PS
Talk. Enter phone number .
phone no.
to
OR
TUV
Press TALK .
TUV
TUV
WXYZ
• To select the less expensive line
automatically
, dial “9” or press the Loop-CO
button to seize a line. ( LCR = Least Cost
Routing ) F1 button is already assigned as the
Loop-CO button.
• Confirming the dialled number before
connecting
You can go off-hook after confirming the
number you dialled. If you misdial, press the
CLEAR button to clear each number from the
right.
• If you go off-hook first and then misdial ,
press the FLASH button and enter the number
again.
• Call information
The following information can be referred to by
repeatedly pressing the CO button in use.
– Phone number (outgoing call) or
call duration (incoming call)
– Meter – Call charge
!!
!!
☞