Panasonic KX-TD1232, User Manual

Page: 158 / 226

DECT
Portable Station
DECT Portable Station 5-7
Button Descriptions
Your PS has the useful function buttons listed below. These buttons make operations simple.
TALK Button: Used to make, receive
or end calls.
INTERCOM Button: Used to make
or receive intercom calls.
C
CANCEL Button: Used to end calls,
or exit the directory or Function
mode.
HOLD Button: Used to place a call
on hold.
FUNCTION Button: Used to enter
into the Function mode or access
features by pressing additional keys.
F1-F3
Flexible CO Buttons (F1 through F3):
Used to make or receive an outside
call. A
F1 button i
s already
assigned
as a Loop-CO button
. Pressing this
button seizes an idle line
automatically.
F
1 through
F3 buttons can be used as
the desired function buttons. (Button
assignment is required.)
If the term is in parentheses like
(Save) , it means this button has
become the “Save” button.
BOOK Button: Used to enter into the
directory mode or select a menu in
the Function mode.
FLASH Button: Used to disconnect
a current call and make another call.
Power Switch: Used to switch the
power ON ( ) or OFF ( ).
CLR
CLEAR / TRANSFER Button: Used
to clear incorrect digits while
entering numbers or transfer a call
to another extension.
Volume Control Button: Used to
select the ringer volume (seven
levels, off and vibration mode) during
on-hook or ringing status, or receiver
volume (three levels) during a
conversation. The volume levels are
indicated by the number of asterisks
on the display.
OK
AUTO / OK Button: Used for System
Speed Dialling and storing program
changes.
REDIAL Button: Used to redial the
last number dialled.
INT'
PAUSE Button ( ):
Used to insert a pause in
numbers.
ABC
GHI
JKL
DEF
FWD/DND Button ( ):
Used to set the Call Forwarding
or Do Not Disturb (DND)
features.
CONF (Conference) Button ( ):
Used to establish a three party
conversation.
TONE Button: Used to change the
dialling mode temporarily to tone.
MESSAGE Button ( ):
Used to leave a message waiting
indication or call back the party
who left the message waiting
indication.
Combination Buttons *
Some special features can be used by combining two buttons.
* These buttons can also be activated using the
display. Refer to “Operation – Selecting the
Feature Buttons on the Display”.