Panasonic KX-TD1232, Programming Manual

Page: 177 / 443

2.5 Outside Line Programming
General Programming 177
[404] DTMF Time
Description
An outside line set to DTMF (Dual Tone Multi-Frequency) mode in programme [402] Dial
Mode Selection can have two settings. This programme sets the duration of the DTMF signals
sent to an outside line to DTMF mode.
Selection
• Outside line (CO) number:
KX-TD816 – 01 through 08,
KX-TD1232 – 01 through 24,
( =all outside lines)
• Time (milliseconds): 80 / 160
Default
All outside lines – 80 ms
Programming
1.
Enter 404.
Display: 404 DTMF TIME
2.
Press NEXT.
Display: CO Line NO?
3.
Enter an outside line number.
To enter outside line number 01, you can also press NEXT.
Display example: CO01: 80msec
4.
Keep pressing SELECT until the desired selection is displayed.
5.
Press STORE.
6.
To programme another outside line, press NEXT or PREV, or SELECT and the desired
outside line number.
7.
Repeat steps 4 through 6.
8.
Press END.
Conditions
• For the KX-TD1232, outside lines 01 through 12 are for the Master System and outside
lines 13 through 24 are for the Slave, if available.
• To assign all outside lines to one selection, press the key in step 3. In this case, the display
shows the contents programmed for outside line 01.
• The DTMF time required is determined by the outside line or PBX line.