manualshive.com logo in svg

Panasonic KX-TD1232, Programming Manual, Page: 23 / 443

Share
Download
Panasonic KX-TD1232 Programming Manual Download Page 23

1.6

Programming Example

Programming Instructions

23

1.6

Programming Example

Programming Example

The following programming instructions assume that you have already entered the 
programming mode and that you will employ method (b) of "Going to another programme 
address" in Section 1.3

Programming Methods.

 Example: programme [001]

System Speed Dialling Number Set

Description

Used to program the System Speed Dial numbers. 
These numbers are available to all extension
users.  There are 500 numbers from 000 through
499.

Selection

•

 Speed dial number: 000 through 499

•

 Telephone number: 24 digits (max.)

Default

All speed dial numbers – Not stored

Programming

1. Enter 001.

Display: SPD Number Set

2. Press NEXT.

Display: SPD Code?

→

3. Enter a speed dial number.

To enter speed dial number 000,
you can also press NEXT.

Display example: 000:Not Stored

4. Enter a telephone number. 

To delete the current entry, press CLEAR. 

To change the current entry, press
CLEAR and enter the new number. 

5. Press STORE.

System Speed Dialling Number Set

(2)

(3)

(4)

(5)

(6)

(7)

(8)

(9)

(10)

(11)

(12)

(13)

(14)

[001]

(1)

(1) Programme address.

(2) Programme title.

(3) Provides a more detailed description of the

programme.

(4) Shows you choices that you can assign.  

(5) Shows you the default (factory setting).

(6) Shows you programming procedures step by step.

•

 While programming, use the overlay.

•

 Before starting to programme, enter the

   programming mode.  (See Entering the
   programming mode in Section 1.2 Using
   Proprietary Telephones.)

Sample of Description

Explanation

(7) Enter the programme address.

(8)

(9)

The display shows the programme title.  If your
telephone has soft buttons, the lower line shows
the functions that are currently assigned to them. 

Press either  Soft 3 

(NEXT)

shown on the display

or the NEXT shown on the overlay.

(10) The message line advises you to enter a speed dial

number.

(11) If the telephone number has already been stored,

the number is displayed.

(12) Enter the telephone number that you want to store.

Your entry is displayed as you enter the digits.

(13) Pressing CLEAR erases the whole entry.

(14) Your entry is now stored.

The indicator lights red and a confirmation tone
lets you know that storage is completed.

Summary of Contents for KX-TD1232




























































































































































































































































































































































































































































Reviews:

No comments