Panasonic KX-TD1232 Programming Manual Download Page 29

Page: 29 / 443

2.1

Manager Programming

General Programming

12.

Enter the hour.

To change the current entry, press CLEAR and enter the new hour.

13.

Press .

14.

Enter the minute.

To change the current entry, press CLEAR and enter the new minute.

15.

Press .

16.

Press

SELECT for AM or PM.

17.

Press .

18.

Press

SELECT for 12 or 24 (clock hour).

19.

Press STORE.

20.

Press END.

Conditions

•

After changing an entry, you can press STORE. You do not have to perform the rest of the
steps.

•

To return to a previous field, press

in steps 4 through 9 and steps 13 through 18.

•

If you hear an alarm after pressing STORE, check that the date is valid.

•

The clock starts immediately after the STORE button is pressed.

•

You cannot leave an entry empty.

Features Guide References

Display Message

Summary of Contents for KX-TD1232




























































































































































































































































































































































































































































Search results

Summary of Contents for KX-TD1232

Reviews:

Related manuals for KX-TD1232

Brands by name

Popular brands

Panasonic KX-TD1232, Programming Manual

Search results

Summary of Contents for KX-TD1232

Reviews:

Related manuals for KX-TD1232

Brands by name

Popular brands