manualshive.com logo in svg

Panasonic KX-TCD706SLS, Operating Instructions Manual, Page: 67 / 120

Share
Download
Panasonic KX-TCD706SLS Operating Instructions Manual Download Page 67

67

Chapter 3

ISDN Operations

COLP (COnnected Line Identification Presentation)

You can choose one of your phone numbers to show on the caller’s display when answering a call. If
not selected, the first number in your MSN list is shown on the caller’s display.

Make sure that the power is ON (p. 13) and the unit is in the standby mode.

1

Press 

.

2

Press 

or 

until the arrow points 

to “

Setting Handset

”, then press

.

3

Press 

or 

until the arrow points 

to “

Call Option

”, then press 

.

4

While “

CLIP/COLP No.

” is at the

arrow, press 

.

•

The MSN list is displayed.

5

Press 

or 

to select the desired

COLP number.

6

Press 

.

•

A beep sounds.

•

The selected COLP number is set.

•

To return to the standby mode, press

.

•

The CLIP number is also set (p. 65).

C L I P / C O L P   N O .

H

0 1 2 3 4 5 6 7 8
0 1 2 3 4 5 6 7 9

COLR (COnnected Line Identification Restriction)

You can restrict showing your MSN to the caller’s display when answering a call by turning COLR ON.

Make sure that the power is ON (p. 13) and the unit is in the standby mode.

1

Press 

.

2

Press 

or 

until the arrow points 

to “

Setting Handset

”, then press

.

3

Press 

or 

until the arrow points 

to “

Call Option

”, then press 

.

4

Press 

or 

until the arrow points 

to “

COLR ON/OFF

”, then press 

.

•

The current settting is displayed.

5

While “

ON

” is at the arrow, press 

.

•

A beep sounds.

•

To return to the standby mode, press

.

To turn the COLR OFF,

Press 

while “

OFF

” is at the arrow in step

5.

C O L R   O N / O F F

H

ON
O F F

KX-TCD706SLS(E)-4ISDN  01.1.30 10:41 AM  Page 67

Summary of Contents for KX-TCD706SLS

























































































































Reviews:

No comments