Panasonic KX-TCD706SLS Operating Instructions Manual Download Page 62

Page: 62 / 120

Checking/Clearing the Total Charge for Each MSN

Make sure that the power is ON (p. 13) and the unit is in the standby mode.

To clear the total charge for
each MSN

Follow steps 1 to 4 of “To check the total
charge for each MSN”.

Press

then

Enter the MSN location number (0–9),
then press

Press

•

A beep sounds.

•

To return to the standby mode, press

To check the total charge for
each MSN

Press

until the arrow points

to “

Setting Base

”, then press

While “

System

” is at the arrow, press

Enter the 4-digit base unit PIN (p. 83).

•

“

Input Command

” is displayed.

Press

then

Enter the MSN location number (0–9),
then press

•

The current total charge of the MSN is
displayed.

Press

•

To return to the standby mode, press

•

If a charge rate is not stored (p. 59), the
display will show the charge count instead of
the call charge.

•

The maximum total call charge displayed is
9999.99.

8 3 # 1 #
M S N C h a r g e

5 0 . 0 0

Ex. The total charge for the MSN

location No.1 is 50.00

Sfr

8 6 # 1 #

C l e a r ?

Ex. MSN location number 1 is selected.

Call Charge

KX-TCD706SLS(E)-4ISDN 01.1.30 10:41 AM Page 62

Summary of Contents for KX-TCD706SLS

























































































































Search results

Summary of Contents for KX-TCD706SLS

Reviews:

Panasonic KX-TCD706SLS, Operating Instructions Manual, Page: 62 / 120

Search results

Summary of Contents for KX-TCD706SLS

Reviews: