Panasonic KX-TCD705HK Operating Instructions Manual Download

Page: 3 / 52

This unit can be mounted on a wall.

•

Install screws using the wall template below.

•

Connect the line cord, and AC Adaptor.

•

Arrange the wires as shown, then mount the unit.

6cm

WALL TEMPLATE

Environment

1) Do not use this unit near water—for example, near a bathtub, washbowl, sink, etc.

Damp basements should also be avoided.

2) The unit should be kept away from heat sources such as radiators, cookers, etc. It also

should not be placed in rooms where the temperature is less than 5°C or greater than
40°C.

3) The AC adaptor is used as the main disconnect device, ensure that the AC outlet is

located/installed near the unit and is easily accessible.

Placement

1) Do not place heavy objects on top of this unit.
2) Care should be taken so that objects do not fall onto, and liquids are not spilled into,

the unit. Do not subject this unit to excessive smoke, dust, mechanical vibration or
shock.

3) Place the unit on a flat surface.

◆

Safety instructions

Take special care to follow the safety suggestions listed below.

WARNING:

TO PREVENT THE RISK OF FIRE OR ELECTRICAL SHOCK, DO NOT EXPOSE THIS
PRODUCT TO RAIN OR ANY TYPE OF MOISTURE.

◆

Wall Mounting

KX-TCD705_HongKong 12/7/01 2:29 pm Page 3

Summary of Contents for KX-TCD705HK





















































Search results

Summary of Contents for KX-TCD705HK

Reviews:

Related manuals for KX-TCD705HK

Brands by name

Popular brands

Panasonic KX-TCD705HK, Operating Instructions Manual

Search results

Summary of Contents for KX-TCD705HK

Reviews:

Related manuals for KX-TCD705HK

Brands by name

Popular brands