Panasonic KX-TCD705HK Operating Instructions Manual Download Page 11

Page: 11 / 52

◆

Making a Call

(For further information on making calls, see pages 12-15)

Z O

2. Dial a phone number.

The dialled number is displayed.
(If a number is entered incorrectly,

Z P

After a few seconds, the display will start showing the length of the call.

◆

Terminating a Call

1. To hang up,

Z P

•

After a few seconds, the display returns to the standby mode.

• If the handset is placed on the base or charger during a call, the call is

disconnected.

•

The dialled number is stored in the redial memory.

◆

Turning the Power On

and hold

•

A confirmation tone sounds.

•

All possible configurations briefly appear.

• When button is released, the display will change to the standby mode.

➀

The current connected base unit number is displayed
• You can choose whether to display the base unit number, handset number or no
display in the standby mode (see page 37).

➁

The number of New Caller ID calls received are displayed.

Basic Start-up Operations

◆

Answering a Call

(For further information on answering calls, see page 16.)

During Incoming call:

Z O

•

You can also answer a call by pressing any dialling button

(-Any Key Answer).

Z %

and when the other party answers, talk into the microphone.

After a few seconds, the display will start showing the length of the call.

◆

Turning the Power Off

Make sure that the unit is in the standby mode.
1.

and hold

until a long beep sounds.

• The display will go blank. (On location of the handset in the base unit, the battery

icon will display even after power off).

Base 1
10 New Calls

Ï  Ô Í Á

➀

➁

Note:

shows that you should press the following key(s).

KX-TCD705_HongKong 12/7/01 2:29 pm Page 11

Summary of Contents for KX-TCD705HK





















































Search results

Summary of Contents for KX-TCD705HK

Reviews:

Related manuals for KX-TCD705HK

Brands by name

Popular brands

Panasonic KX-TCD705HK, Operating Instructions Manual

Search results

Summary of Contents for KX-TCD705HK

Reviews:

Related manuals for KX-TCD705HK

Brands by name

Popular brands