Multi-unit Operation
43
Note:
L
If handset 2 (the receiver) did not prepare
for copying,
“
Copy Failure
”
will be
displayed on handset 1 (the sender).
L
If phonebook memory is full on handset 2
(the receiver),
“
Copy Incomplete
”
will
be displayed on handset 1 (the sender).
Transferring calls
between handsets,
conference calls
Outside calls can be transferred between 2
handsets in the same radio cell. 2 handsets
in the same radio cell can have a conference
call with an outside party.
Example:
When handset 1 transfers a call
to handset 2
1
Handset 1:
During an outside call, press
{
INT
}
and
{
2
}
(desired handset number).
L
The outside call will be put on hold.
L
If there is no answer, press
{
INT
}
to
return to the outside call.
2
Handset 2:
Press
{C}
or
{s}
to answer the page.
L
Handset 2 can talk with handset 1.
3
Handset 1:
To complete the call transfer, press
{ih}
.
To establish a conference call, press
{
3
}
.
Transferring a call without speaking to
the other handset user
1
During an outside call, press
{
INT
}
, then
press the desired handset number.
L
The other handset rings if it is within
range of the base unit and turned on.
2
Press
{ih}
.
L
The outside call rings at the other
handset.
Note:
L
k
flashes to indicate the outside call is on
hold.
L
If the other handset user does not answer
the call within 1 minute, the call will ring at
your handset again.
KX-TCD560-580NZ(e).book Page 43 Tuesday, July 6, 2004 10:49 AM
