Making/Answering Calls
19
2
When finished talking, press
{ih}
or
place the handset on the base unit.
Auto talk feature
You can answer calls simply by lifting the
handset off the base unit. You do not need to
press
{C}
. To turn this feature on, see
page 30.
To adjust the ringer volume when an
outside call comes in
Press
{e}
or
{v}
when an outside call
comes in.
Note:
L
The ringer volume cannot be adjusted if
the handset is on the base unit.
Answering calls using the
base unit
1
Press
{s}
.
2
When finished talking, press
{s}
.
To adjust the ringer volume
Press
{
>
}
or
{
<
}
when a call is received or
when the base unit is in standby mode. 4
volume levels (high/medium/low/off) are
available. To turn the ringer volume off,
press and hold
{
<
}
until the base unit
beeps. To turn the ringer volume on again,
press
{
>
}
.
Note:
L
When the ringer volume is turned off,
U
is
displayed on the base unit (KX-TCD240
only).
L
When the ringer volume is turned off, the
base unit will not ring for outside calls and
it will ring at the low level for intercom
calls.
L
When the message alert feature is on
(page 52), the base unit will beep even if
the ringer volume is turned off (KX-
TCD240 only).
To change ringtones
You can change the ringtone used by the
base unit.
KX-TCD230 users:
Press
{<}
or
{>}
repeatedly to select the
desired ringtone.
KX-TCD240 users:
1
Press
{
>
}
or
{
<
}
when the base unit is
in standby mode.
2
Press
{
<
}
or
{
>
}
repeatedly to
select the desired ringtone, then press
{
5
}
.
TCD230-240FX(e).book Page 19 Wednesday, June 8, 2005 7:15 PM
