Panasonic KX-TCD230FX Operating Instructions Manual Download

Page: 11 / 72

Preparation

Base unit display icons (KX-TCD240
only)

Following icons appear on the base unit
display to indicate the current status of the
unit.

Connections

When the AC adaptor is connected, a short
beep will be heard. If it is not heard, check
the connections.

Important:

Use only the AC adaptor and telephone
line cord supplied with this unit.

Note:

After connection, you must charge the
batteries to make or answer calls with the
handset (page 12).

Never install telephone wiring during a
lightning storm.

The AC adaptor must remain connected
at all times. (It is normal for the adaptor to
feel warm during use.)

The AC adaptor should be connected to a
vertically oriented or floor-mounted AC
outlet. Do not connect the AC adaptor to a
ceiling-mounted AC outlet, as the weight

KX-TCD230 users:

The base unit or another
handset is on a call.

KX-TCD240 users:

The base unit is on a call.
Another handset is on a call
or is using the answering
system.

Display
icon

Meaning

Answering system will
answer calls with a greeting
message and caller
message will not be
recorded. (page 52)

Ringer volume is off. (page
19)

Display
icon

Meaning

(220–240 V, 50 Hz)

To telephone
network

Hook

TCD230-240FX(e).book Page 11 Wednesday, June 8, 2005 7:15 PM

Summary of Contents for KX-TCD230FX









































































Search results

Summary of Contents for KX-TCD230FX

Reviews:

Related manuals for KX-TCD230FX

Brands by name

Popular brands

Panasonic KX-TCD230FX, Operating Instructions Manual

Search results

Summary of Contents for KX-TCD230FX

Reviews:

Related manuals for KX-TCD230FX

Brands by name

Popular brands