SMS (Short Message Service)
38
5
Press
{j
/OK
}
, select
“
Edit
Message
”
, press
{>}
, then continue
from step 4, “Writing and sending a new
message”, page 37.
Erasing saved messages
1
Press
{j
/OK
}
.
2
Select
“
SMS
”
, then press
{>}
.
3
Select
“
Send List
”
, then press
{>}
.
4
Press
{e}
or
{v}
repeatedly to select
the message, then press
{j
/OK
}
.
5
Press
{j
/OK
}
, select
“
Erase
”
, then
press
{>}
.
L
To erase all messages, select
“
Erase
All
”
, then press
{>}
.
6
Select
“
Yes
”
, then press
{>}
.
7
Press
{ih}
.
Receiving a message
When an SMS message is received:
– a tone is heard (if the ringer is turned off,
this tone is not heard)
–
“
Receiving SMS Message
”
is
displayed
–
F
is displayed
Reading a received message
1
Press
{j
/OK
}
.
2
Select
“
SMS
”
, then press
{>}
.
3
Select
“
Receive List
”
, then press
{>}
.
4
Press
{e}
or
{v}
repeatedly to select a
message.
L
Messages which have already been
read are indicated by a “
Q
”, even if
they were read using another handset.
5
Press
{j
/OK
}
to read the message
content.
Note:
L
To call the message sender, press
{C}
or
{s}
.
L
If
“
SMS Full
”
is displayed, new SMS
messages cannot be received. Erase
unnecessary messages (page 38).
L
If you receive a message from a party
saved in the handset phonebook, the
stored name is displayed.
L
Some SMS service providers attach a 1-
digit number to the message sender’s
phone number, and sender names stored
in the handset phonebook may not be
displayed as a result.
Replying to a message
1
While reading a received message,
press
{j
/OK
}
.
2
Select
“
Reply
”
, then press
{>}
.
3
Enter a message (page 41), then press
{j
/OK
}
.
4
Edit the destination phone number
and/or press
{j
/OK
}
.
5
Continue from step 6, “Writing and
sending a new message”, page 37.
Editing/forwarding a message
1
While reading a received message,
press
{j
/OK
}
.
2
Select
“
Edit Message
”
, then press
{>}
.
3
Continue from step 4, “Writing and
sending a new message”, page 37.
Erasing received messages
1
While reading a received message,
press
{j
/OK
}
.
2
Select
“
Erase
”
, then press
{>}
.
L
To erase all messages, select
“
Erase
All
”
, then press
{>}
.
3
Select
“
Yes
”
, then press
{>}
.
TCD210220FX(e-e).book Page 38 Tuesday, January 18, 2005 9:04 AM