76
Problem
While programming or
searching, the unit starts to
ring and stops the program/
search.
The unit does not display the
caller’s name and/or phone
number.
The handset display goes to
the standby mode while
viewing the Caller List.
When a second call is
received during a
conversation, the unit does
not display the new caller’s
name and/or phone number.
(LOCATOR/INTERCOM)
does
not function.
Cause and Remedy
≥
To answer the call, press
or
.
Start again from the beginning after
hanging up.
≥
You need to subscribe to a Call Display
service from a telephone company.
≥
Other telephone equipment may be
interfering with your phone. Disconnect
it and try again.
≥
Other electrical appliances connected to
the same outlet may be interfering with
the Call Display information.
≥
Telephone line noise may be affecting
the Call Display information.
≥
Do not pause for over 60 seconds while
searching.
≥
The line mode selection is incorrect.
See page 17.
≥
The caller requested not to send his/her
information. See page 35.
≥
The handset is too far from the base
unit.
≥
The handset is engaged in an outside
call or is viewing the Caller List/directory
list. Wait until the
IN USE/CHARGE/HOLD indicator light
goes out.
“
Before Requesting Help
PQQX13370ZA-BM-6 02.4.11 10:03 AM ページ 76
