Panasonic KX-TC1733CB Operating Instructions Manual Download Page 61

Page: 61 / 84

Answering System

Erasing Messages

The unit will announce the remaining recording time after playback, if it is
less than 5 minutes. New messages cannot be recorded when:
—“

Memory full

” is heard.

—“

” is displayed on the base unit.

—the ANSWER ON indicator flashes rapidly.
Erase some, or all, of the messages. We recommend that you erase
unnecessary messages after each playback.

Erasing a specific message

Press

(ERASE)

while the message you want to erase is being played.

≥

The unit erases the message.

≥

A short beep will sound and the unit will continue to play the next message.

Erasing all messages

All recorded messages, except the greeting message, can be erased at
one time.

Press

(ERASE)

≥

“

Press ERASE again to erase all

messages

” is heard.

Within 5 seconds, press

(ERASE)

again.

≥

A beep sounds and “

No messages

” is

heard. The base unit display shows
“0”.

≥

The information in the Caller List will not be erased. To erase Caller List
information, see page 41.

FULL

(ERASE)

ANSWER ON Indicator

PQQX13370ZA-BM-5 02.4.11 10:03 AM ページ 61

Summary of Contents for KX-TC1733CB





















































































Search results

Summary of Contents for KX-TC1733CB

Reviews:

Related manuals for KX-TC1733CB

Brands by name

Popular brands

Panasonic KX-TC1733CB, Operating Instructions Manual

Search results

Summary of Contents for KX-TC1733CB

Reviews:

Related manuals for KX-TC1733CB

Brands by name

Popular brands