Panasonic KX-TC1733CB Operating Instructions Manual Download Page 75

Page: 75 / 84

Useful Information

Before Requesting Help

“

Problem

“

No link to base

Place on cradle and

try again.

” is displayed

and an alarm tone sounds.

Static, sound cuts in/out,
fades. Interference from
other electrical units.

The handset does not ring.

The handset display is
blank.

The handset display is still
blank after pressing

(›)

(‹)

(ﬁ)

EDIT

(ﬂ)

You cannot store a name
and phone number in the
directory.

Cause and Remedy

≥

You are too far from the base unit.
Move closer and try again.

≥

Place the handset on the base unit and
try again.

≥

Plug in the AC adaptor.

≥

Raise the base unit antenna.

≥

Locate the handset and the base unit
away from other electrical appliances
(p. 3).

≥

Move closer to the base unit.

≥

Raise the base unit antenna.

≥

Press

(ﬁ)

to select a clearer

channel in the talk, speakerphone,
intercom or remote operation mode.

≥

The ringer volume is set to OFF. Set to
HIGH or LOW (p. 20).

≥

The handset is in the standby mode
(p. 14). Press

(›)

(‹)

(ﬁ)

EDIT

(ﬂ)

to turn the display on.

≥

Charge the battery fully (p. 13).

≥

You cannot store an item in the
directory while the unit is in the talk,
speakerphone or intercom mode, or
while the answering system is in use.

≥

Do not pause for over 60 seconds while
storing.

Cordless Telephone

PQQX13370ZA-BM-6 02.4.11 10:03 AM ページ 75

Summary of Contents for KX-TC1733CB





















































































Search results

Summary of Contents for KX-TC1733CB

Reviews:

Related manuals for KX-TC1733CB

Brands by name

Popular brands

Panasonic KX-TC1733CB, Operating Instructions Manual

Search results

Summary of Contents for KX-TC1733CB

Reviews:

Related manuals for KX-TC1733CB

Brands by name

Popular brands