Panasonic KX-TC1713CB Operating Instructions Manual Download

Page: 64 / 68

“

Before Requesting Help

Cause and Remedy

≥

Do not pause for over 60 seconds while
searching.

≥

The line mode selection is incorrect.
See page 16.

≥

The caller requested not to send his/her
information. See page 30.

≥

The handset is too far from the base
unit.

≥

The handset is engaged in an outside
call or is viewing the Caller List/directory
list. Wait until the IN USE/CHARGE
indicator light goes out.

≥

If the last number dialed was more than
32 digits long, the number will not be
redialed correctly.

≥

Access numbers entered after pressing

(TONE)

will not be included when

redialing.

≥

Charge the battery fully (p. 12).

≥

Clean the charge contacts and charge
again (p. 13).

≥

Install a new battery (p. 61).

≥

This is normal.

Problem

The handset display goes to
the standby mode while
viewing the Caller List.

When a second call is
received during a
conversation, the unit does
not display the new caller’s
name and/or phone number.

(LOCATOR/INTERCOM)

does

not function.

You cannot redial by pressing

(REDIAL/PAUSE/FUNCTION)

(REDIAL/PAUSE)

“

Recharge

” is displayed,

“

” flashes or the unit

beeps intermittently.

You charged the battery
fully, but “

Recharge

” is still

displayed and/or “

”

continues to flash.

The IN USE/CHARGE
indicator light does not go
out while charging.

PQQX13142ZA-AK-5

01.7.18

8:58

y [ W 64

Summary of Contents for KX-TC1713CB





































































Search results

Summary of Contents for KX-TC1713CB

Reviews:

Related manuals for KX-TC1713CB

Brands by name

Popular brands

Panasonic KX-TC1713CB, Operating Instructions Manual

Search results

Summary of Contents for KX-TC1713CB

Reviews:

Related manuals for KX-TC1713CB

Brands by name

Popular brands