63
Useful Information
“
Problem
You cannot program items,
such as the dialing mode.
Previously programmed
information is erased.
You cannot store a name
and phone number in the
directory.
While programming or
searching, the unit starts to
ring and stops the program/
search.
The unit does not display the
caller’s name and/or phone
number.
Cause and Remedy
≥
Programming is not possible while the
unit is in the talk, speakerphone or
intercom mode, when viewing the Caller
List/directory list.
≥
Do not pause for over 60 seconds while
programming.
≥
Move closer to the base unit.
≥
(›)
,
(‹)
,
CH
(fi)
or
EDIT
(fl)
may have
been pressed when you picked up the
handset. Press
(OFF)
and try again.
≥
If a power failure occurs, programmed
information may be erased. Reprogram
if necessary.
≥
You cannot store an item in the
directory while the unit is in the talk or
intercom mode.
≥
Do not pause for over 60 seconds while
storing.
≥
To answer the call, press
,
or
(SP-PHONE)
. Start again from the
beginning after hanging up.
≥
You do not subscribe to a Call Display
service.
≥
Other telephone equipment may be
interfering with your phone. Disconnect
the other equipment and try again.
≥
Other electrical appliances connected to
the same outlet may be interfering with
the Call Display information.
≥
Telephone line noise may be affecting
the Call Display information.
PQQX13142ZA-AK-5
01.7.18
8:58
AM
y [ W 63