Panasonic KX- TAW848, Feature Manual

Page: 28 / 250

1.3 C
28 Feature Manual
3.
System Speed Dialing Table
The System Speed Dialing Table can store telephone numbers, names, and CLI destinations for
hundreds of callers.
a)
Telephone Number: Contains a CO Line Access number and the caller's telephone number.
If Automatic Caller ID Number Modification is used, telephone numbers should be stored in
the System Speed Dialing Table in their modified format in order for CLI distribution to function.
b)
Caller's Name: Shown on the display and logged (Incoming Call Log, Station Message Detail
Recording [SMDR]) when a call from this telephone number is received.
c)
CLI Destination: The destination to which an incoming call from the stored telephone number
is directed via the CLI distribution feature.
[Programming Example: System Speed Dialing Table]
4.
Displaying the Caller's Name
In addition to the System Speed Dialing Table, each extension can store names and numbers in
Personal Speed Dialing. Therefore, it is entirely possible for the same telephone number to be stored
under a different name in different locations within the PBX.
When a call containing Caller ID information is received, the PBX will search for the caller's name in the
following order, then show that name on the display and log it via SMDR.
1)
Personal Speed Dialing data of the extension which received the call
2)
System Speed Dialing Table
3)
The Caller ID information received from the telephone company
If a caller's name is not stored in the PBX or sent from the telephone company, it will not be displayed
or logged.
Conditions
[General]
• Caller ID signaling type can be selected through system programming.
[Caller ID to SLT Port]
• Hardware Requirement:
The EXT-CID card
• When the caller's number is sent to an SLT, a CO Line Access number can be automatically added to
the telephone number through system programming for calling back.
• Through system programming, a group of 4 SLT ports can be assigned to receive Caller ID information.
Up to 2 groups can be programmed. Therefore, a maximum of 8 SLTs can receive Caller ID information.
*1
→
2.12.1 [6-1] System Speed Dial—CO Line Access Telephone Number
→
[001] System Speed Dialing Number
*2
→
2.12.1 [6-1] System Speed Dial—Name
→
[002] System Speed Dialing Name
*3
→
2.12.1 [6-1] System Speed Dial—CLI Destination
Location
(System Speed
Dialing No.)
000
001
System Speed
Dialing Name
*1
ABC Company
XYZ Company
Telephone No.
*2
912125551234
913135551234
CLI Destination
*3
200
300