1.19 V
Feature Manual
215
[Programming Example of VM (DTMF) Group]
→
2.9.19 [3-8-2] VM(DTMF) Group—Group Settings
[Programming Example of VM (DPT) Group]
2.
Incoming Calls to VM Group
When incoming calls are received at the floating extension number of the VM group, calls will hunt
starting at the lowest VM port number. In this case, the FWD and DND settings (
→
1.4.8 DND (Do Not
Disturb),
→
1.6.6 FWD (Call Forwarding)) for each extension port are disregarded.
It is programmable whether the calls queue when all extension ports in the group are busy through
system programming. If the queuing is disabled through system programming, the call will be redirected
to the destination, assigned on the trunk group which receives the call, by the Intercept Routing feature.
Conditions
•
It is possible to call an extension (extension port) in a VM group directly. If the calls are routed directly
to the extension in the group, it is possible to enable some features (e.g., FWD, Idle Extension Hunting)
on the extension in the group.
The Voice Mail DTMF/DPT (Digital) Integration (e.g., command transmit) is also available on the
extension.
•
One-touch Voice Mail Feature Access
It is possible to assign a One-touch Dialing button for direct access to a Voice Mail feature. (
→
1.12.2
One-touch Dialing) For example, to access a mailbox (mailbox number 123) of the VPS (extension
number 165) directly, assign "
165
#6
123
" to a One-touch Dialing button. When pressing this button, the
outgoing message (OGM) of the mailbox will be heard.
•
All ports in a VM (DPT) group must be connected to either the same HLC or PLC card, or to the pre-
installed hybrid ports.
Programming References
PC Programming Manual
2.7.4 [1-1] Slot—Extension Port
→
DPT Type—Type (for Hybrid port)
→
DPT Type—VM Unit No. (for Hybrid port)
→
DPT Type—VM Port No. (for Hybrid port)
2.9.15 [3-7-1] VM(DPT) Group—System Settings
*1
:
→
2.9.16 [3-7-2] VM(DPT) Group—Unit Settings—Floating Extension No.
→
[660] VM Group Floating Extension Number
*2
:
→
2.9.16 [3-7-2] VM(DPT) Group—Unit Settings—Group Name
VM (DTMF)
Group No.
1
2
Group
Name
Company B
Company C
Service
Mode
AA
VM
Floating
Extension
No.
200
300
1
201
301
2
202
302
3
203
303
Extension No. of
Port Connected to
VPS Port
Floating Extension No.
*
1
500
Group Name
*
2
Company A
Summary of Contents for KX- TAW848
