Panasonic KX-TA308 Operating Instructions Manual Download

Page: 92 / 132

1.7

Useful Features

1-84

Operations

Allows you to unlock the door from your telephone.
Up to 4 door openers can be connected to the system.

To unlock the door from an assigned extension

Any Telephone

Enter a door opener number
(1 through 4).

Dial 55.

door opener no.

Lift the handset or press
SP-PHONE/MONITOR.

Confirmation
tone

Hang up or press
SP-PHONE/MONITOR.

• The door is left unlocked for 5 seconds (default).

PT and SLT

For a PT: Dial 5.
For an SLT: Flash the hookswitch and dial 5.

Hang up or press
SP-PHONE/MONITOR.

For a PT

For an SLT

To unlock the door while talking to the doorphone

• The door is left unlocked for 5 seconds (default).

Door Opener

• An optional doorphone/door opener card is necessary for this feature.
• If you dial 5 again while the door is open, the door will stay open for another 5 seconds

(default).

• You can program the extensions which can open the doors for the day, night and lunch

modes.

• You can modify the door opener timer in System Programming.
• The door opener will open the door, even if a doorphone is not installed.

• See the Installation Manual, Section 3, “Door Opener”.

☞

Summary of Contents for KX-TA308





































































































































Search results

Summary of Contents for KX-TA308

Reviews:

Related manuals for KX-TA308

Brands by name

Popular brands

Panasonic KX-TA308, Operating Instructions Manual

Search results

Summary of Contents for KX-TA308

Reviews:

Related manuals for KX-TA308

Brands by name

Popular brands