Panasonic KX-TA308 Operating Instructions Manual Download

Page: 28 / 132

1-20

Operations

1.3

Making Calls

• Helpful hints for the Handsfree operation:

— Use this unit in a quiet room for best performance.
— If you and the other party talk at the same time, parts of your conversation will be lost.

To avoid this, talk alternately.

• The handsfree mode is canceled if you do not start dialing within 10 seconds.

• The KX-T7350/KX-T7050/KX-T7055 have MONITOR buttons instead of a SP-PHONE

button. It can be used for handsfree dialing, etc., but it cannot be used for a handsfree
conversation.

• You can enable the handsfree mode by pressing a CO or INTERCOM button.

• See the Installation Manual, Section 3, “Handsfree Operation”.

Lift the handset.

Switching from handsfree to the handset mode

Allows you to dial and to talk to the other party without lifting the handset.

Handsfree Operation

Press SP-PHONE.

SP-PHONE

• The microphone and speaker are now activated and the

handsfree operation is available.

Press SP-PHONE.

SP-PHONE

Hang up.

• Do not replace the handset without pressing the SP-PHONE

button first, or the line will be disconnected.

Switching from the handset to handsfree mode

☞

Summary of Contents for KX-TA308





































































































































Search results

Summary of Contents for KX-TA308

Reviews:

Related manuals for KX-TA308

Brands by name

Popular brands

Panasonic KX-TA308, Operating Instructions Manual

Search results

Summary of Contents for KX-TA308

Reviews:

Related manuals for KX-TA308

Brands by name

Popular brands