background image

1.6

Before Leaving Your Desk

1-54

Operations

PT and SLT

Busy or No Answer

You can forward your calls to another extension when your extension is busy or if you do not
answer the call within a pre-determined time.

Setting

• 1.2 Proprietary Telephone Settings, “Customizing Your Telephone Functions”, 

Intercom Alert Assignment

Lift the handset or 
press SP-PHONE
/MONITOR.

For a PT: Press FWD/DND.
For an SLT: Dial 71.

Hang up or press 
SP-PHONE
/MONITOR.

Confirmation 
tone and 
dial tone

Dial 2. Enter the destination 

extension number 
(100 through 199).

Dial #.

2

For an SLT

For a PT

1

7

FWD/DND

extension no.

#

• You may press the flexible button

assigned as the FWD/DND button
instead.

• The FWD/DND indicator light flashes red

slowly.

• Single line telephone users can dial “0” instead

of “#”.

PT and SLT

• The FWD/DND indicator light flashes red slowly.

To Outside (CO) Line

You can forward calls to an external party.
System Programming is required to execute this feature.

Setting

For a PT: Press 
                FWD/DND.
For an SLT: Dial 71.

Enter the line 
access code
(9, 0 or 81 
through 86).

Enter the 
phone number.

Dial #.

7

1

For an SLT

For a PT

Dial 3.

line access code

phone no.

3

Lift the handset 
or press 
SP-PHONE/MONITOR.

Hang up or press 
SP-PHONE/MONITOR.

Confirmation 
tone and 
dial tone

FWD/DND

#

Summary of Contents for KX-TA308





































































































































Reviews: