Panasonic KX-TA1232, Features Manual

Page: 160 / 224

General Features
160 Features Guide
Phantom Extension
Description
Allows the system to route calls to a phantom extension. A call to a phantom extension is sent
to extensions that have the corresponding Phantom Extension button. A Phantom Extension
button can be assigned by Station Programming.
Conditions
• Types of calls whose destination can be the phantom extension are:
Outside calls —
Direct In Lines (DIL) 1:1;
Direct Inward System Access (DISA);
Intercept Routing — No Answer (IRNA);
Intercom calls —
Extension; Transfer
• You can call the phantom extension by pressing the Phantom Extension button or by dialing
the phantom extension number. If several extensions have the same phantom extension
number, they will ring simultaneously.
• A phantom number must be assigned by System Programming before assigning the
Phantom Extension button by Station Programming.
• There is a maximum of 128 phantom numbers. Each number has two to four digits,
consisting of numbers
0 through 9.
• The phantom number cannot be used for feature settings such as Call Forwarding.
• The lighting patterns and statuses of the Phantom Extension button are shown below.
• A DSS (Direct Station Selection) button can be assigned as the Phantom Extension button
so that the operator can use the button for transferring a call.
• Whether or not the extension will ring when a call is received at a phantom extension is
programmable.
Programming Guide References
• [124] Phantom Extension Number Assignment
Features Guide References
None
Lighting pattern Phantom Extension Status
Off Idle
Red on Calling a phantom extension
Flashing green rapidly Incoming call