background image

General Features

138

Features Guide

Message Waiting 

Description

The system supports the ability to inform the called party of a message waiting. The called 
party, with a MESSAGE button, Another Extension Message Waiting button or a Phantom 
Extension Message Waiting button knows there is a message if the MESSAGE button, Another 
Extension Message Waiting button or Phantom Extension Message Waiting button LED 
(Light Emitting Diode) lights red. If the button is not provided or assigned, the called party 
hears a special dial tone, when he / she goes off-hook (MESSAGE button only). Pressing the 
lit MESSAGE button, Another Extension Message Waiting button / Phantom Extension 
Message Waiting button or dialing the Message Waiting feature number can call back the 
caller or listen to messages which are stored in a mailbox in the Voice Processing System. 

Conditions

You can assign a flexible CO button as the Another Extension Message Waiting button or 
the Phantom Extension Message Waiting button in program "[005] Flexible CO Button 
Assignment".

For a proprietary telephone which does not have a MESSAGE button, a flexible CO button 
can be assigned as the MESSAGE button either by System or Station Programming.

For single line telephone users, the message waiting ring tone can be sent to notify the user. 
The message waiting ring interval time is programmable by System Programming (default: 
0=no ring).

Canceling a message can be performed from the sending extension or from the receiving 
extension.

The system supports a maximum of 128 simultaneous messages. 

Messages are always left on the original extension. They can not be sent to a Call 
Forwarding or Station Hunting destination.

The message waiting ring type can be changed in program "[990] System Additional 
Information, Area 05 - Bit 11".

Programming Guide References

[005] Flexible CO Button Assignment

[100] Flexible Numbering

[216] Message Waiting Ring Interval Time

[990] System Additional Information

Features Guide References

Dial Tone, Distinctive

Voice Mail Integration

Summary of Contents for KX-TA1232

































































































































































































































Reviews: