16
Installation of Lightning Protectors
Installation of the KX-A207
5. Secure the external and internal cables and the earth
wire to the building. Then, install the arrester and
mount the cover on the protector.
3. Remove about 1.5 cm (
19
/
32
inch) of insulation from the
ends of the external and internal cables, then pass the
cables through the rubber packing.
2. Remove about 1 cm (
13
/
32
inch) of insulation from the
end of the earth wire. Insert the earth wire through the
bottom of the protector base and secure it to the earth
terminal.
4. Fold the external and internal cables, and connect them
to the terminal screws using washers.
1. Secure the protector to a building with the enclosed
mounting screws.
