13
Installation of Optional Card and Unit
Doorphone (KX-T30865) Connection
2-conductor wiring cord
GROUND
SYSTEM
EXTN.
5
EXTN.
3
EXTN.
1
CO 2
CO 1
EXTN.
6
EXTN.
4
EXTN.
2
DPH
R
T
Panasonic
DPH
KX-T30865
Notes
• The doorphone adaptor is not required for KX-T206.
• To avoid howling, you must assign all extensions as “DISABLE” in the “#06/#76 Doorphone
Assignment (Day/Night)” program when you do not connect a doorphone.
• If howling occurs while using the doorphone feature, check the wiring.
• You can use cable holders to fix the wires.
DISA Card (KX-T20691) Connection
1. Disconnect the AC cord from the system.
2. Loosen the screws and remove the cover.
3. Attach the DISA card to the marked connectors.
4. Replace the cover and secure the screws.
5. Connect the AC cord again.
CO2
CO 1
GROUND
EXTN.
5
EXTN.
3
EXTN
1
EXTN.
6
EXTN.
4
EXTN.
2
DPH
POWER
ELECTRONIC MODULAR SWITCHING SYSTEM
The DISA feature allows an outside caller to have direct access to intercom calls. System pro-
gramming is required. See “#10 OGM Recording” on page 22 and “#24 Call Incoming Mode
Selection” on page 26.
Keep the following conditions in mind:
• When a caller enters the second digit of an extension number (1 through 6) during the mes-
sage, he/she can reach the extension directly.
• If the call is not received, the assigned extensions will ring. See “#04/#74 CO1 Ringing
Assignment (Day/Night), “#05/#75 CO2 Ringing Assignment (Day/Night)” on page 20 and
“#60 DISA Ringing Time” on page 28.
• If the caller enters 0, the assigned extensions can receive his/her call. See “#04/#74 CO1
Ringing Assignment (Day/Night), “#05/#75 CO2 Ringing Assignment (Day/Night)” on page
20.
• If the caller enters 7, 8 or 9, or enters nothing, extension 21 will receive his/her call.
• Any calls from a rotary phone will be received by extension 21.
