4
Installations and connections
Installing the ink film
2
Insert the ink film.
Insert the white core into the slots shown in the
picture below.
1
Open the control panel.
Find the “T” shaped gear (blue).
1
Ink film
Insert the blue core into the right slot of the main unit.
Insert the “T” shaped gear (blue) into the left slot of
the main unit.
3
2
Blue core
“T” shaped gear (blue)
Right slot
4
White core
“T” shaped gear (blue)
Do not
be slacken.
Control panel
Press
here.
1
Open the control
panel until it locks.
2
2
3
If the ink film is slack, tighten it by winding the “T”
shaped gear.
5
3
Close the control panel until it locks.
