Panasonic KX-P8415 Settings Manual Download Page 6

Page: 6 / 75

Settings and Printing

Maintenance

Specifications

Place the media with the print side down under the hooks in the tray.

The height of media should not exceed the limit mark on the tray, or it may cause a jam.

OTES

Most media has instructions recommending the side to be printed first.

Do not mix different types or thicknesses of media in the media tray at one time; this may
cause a jam.

When using transparency (3M CG3710), be sure to use the transparency tray and load it

with the leading tape side facing up (3M CG3710) and the taped end under the hooks.

Slide the media tray completely into the slot.

OTE

When using transparency with leading tape, remove the tape after printing.

Loading Media

Paper

Transparency

Leading tape side up

Summary of Contents for KX-P8415












































































Search results

Summary of Contents for KX-P8415

Reviews:

Related manuals for KX-P8415

Brands by name

Popular brands

Panasonic KX-P8415, Settings Manual

Search results

Summary of Contents for KX-P8415

Reviews:

Related manuals for KX-P8415

Brands by name

Popular brands