1
Repeat steps
1
through
3
on
page 20
.
2
Press the
H
/ENTER button.
3
Press the
F
F
/CONTINUE or
G
G
/CANCEL button to darken/lighten all the
colors.
To make the color density setting of the Color Calibration Page darker or lighter by 1 level,
increase or decrease a value of the Calibration Offset by 2 by pressing the
F
F
/CONTINUE or
G
G
/CANCEL button.
For example, when Calibration Offset is 0:
B
If you wish to make the density setting darker by 1 level:
—
Select 2 by pressing the
F
F
/CONTINUE button 2 times.
B
If you wish to make the density setting lighter by 1 level:
—
Select -2 by pressing the
G
G
/CANCEL button 2 times.
4
Press the
H
/ENTER button.
5
Press the
F
F
/CONTINUE button 4 times and the following is displayed.
6
Press the
H
/ENTER button to reprint the Color Calibration Page.
B
The line enclosure reflects the changes made to the settings.
B
If you are not satisfied with the current color density settings, repeat the steps above.
Settings and Printing
Maintenance
Specifications
23
Adjusting the Density for All Colors Simultaneously
Bias Adjustment
Calibration Offset
Calibration Offset
0* (-5 to 5)
Bias Adjustment
CYAN
Bias Adjustment
Calibration Test Print
Adjusting the Color Density