![background image](http://html1.mh-extra.com/html/panasonic/kx-ns1000/kx-ns1000_getting-started_3538271050.webp)
For KX-UT Series SIP Phones
If networking settings have been completed, when KX-UT series SIP phones are connected to the same
network as the PBX, they will be registered automatically as same as when they are registered in Full Automatic
mode. No registration procedure is required.
Note
No more than 64 IP-PTs can register extension numbers at the same time.
Manual Mode
For IP-PTs or KX-UT Series SIP Phones
After connecting IP-PTs or KX-UT series SIP phones to the PBX over a network, register those IP terminals
to the PBX manually.
Follow the procedure below for registration.
1.
a.
Click
Setup
®
PBX Configuration
®
Configuration
®
Slot
.
b.
For IP-PTs
:
Click
Virtual
®
V-IPEXT32
.
For KX-UT series SIP phones
:
Click
Virtual
®
V-UTEXT32
.
c.
For IP-PTs
:
Move the mouse pointer over the
V-IPEXT32
card
(Virtual 32-Channel VoIP Extension Card).
For KX-UT series SIP phones
:
Move the mouse pointer over the
V-UTEXT32
card
(Virtual UT Extension Card).
A menu will be shown under the mouse pointer.
d.
Click
Port Property
.
To register the IP-PT or KX-UT series SIP phone by entering the MAC address directly:
2.
If the
Connection
column for the port is
INS
, click
INS
,
and then click
OUS
on the dialogue box to change the
port’s status.
3.
Enter the MAC address of the IP-PT or SIP phone in the
IP Phone Registration ID (MAC Address)
box.
4.
Click
Apply
.
Once the IP-PT or SIP phone is successfully registered,
its status will update to show "Registered".
5.
In the
Connection
column for the port, click
OUS
, and
then click
INS
on the dialogue box to change the port’s
status.
6.
For KX-UT series SIP phones only:
Follow the procedure below to change the
IP Terminal
Registration Mode
from
Manual
to
Full Automatic
.
a.
Click
Setup
®
PBX Configuration
®
Configuration
®
Slot
®
Site Property
®
Main
.
b.
In the
Main
tab, select
Full Automatic
for
IP
Terminal Registration Mode
.
c.
Click
OK
.
50
Getting Started
4.3.2 Registering IP Telephones
Summary of Contents for KX-NS1000
