Panasonic KX-NS1000, Getting Started

Page: 32 / 58

4.1.2 Installing the Virtual IP Cards to the PBX
1. a.
Click Setup
®
PBX Configuration
®
Configuration
®
Slot .
b.
Click Virtual .
2. a.
Click on the name of the desired card.
b.
From the Total number of cards drop-down list,
select the desired number of cards.
3. A confirmation message will be displayed. Click OK .
4.1.3 Installing Additional Activation Keys
When the number of preinstalled activation keys is not enough for the desired configuration or when you wish
to use enhanced features, additional activation keys in the form of activation key files can be installed using
Web Maintenance Console.
Activation Key Code and Key Management System
To obtain additional activation keys, you need to purchase the appropriate activation key codes and access
the Key Management System. You can download the activation keys as an activation key file from the Key
Management System. To download the activation keys, enter the MPR ID number shown on the back of the
main unit, and activation key number and registration ID provided on each activation key code.
Note
For information about the types of activation keys, refer to "3.1 Information about the Activation Keys" in
the Installation Manual.
Installing the Activation Key Files
1.
Log in to Web Maintenance Console using the Installer level account.
2.
Click Maintenance
®
Utility
®
Activation Key Installation .
Activation Key Installation window will be displayed.
3.
Click Browse and specify the directory where the activation key files are stored, and click Open .
4.
A list of activation key files stored in the specified directory is displayed. Check the boxes next to the
activation keys to install to the PBX, and click
Install .
5.
The activation keys will be copied to the Master unit, and then the activation keys that Slave units require
will be copied to the Slave units of the One-look network. When installation is complete, the message,
"The activation key has been installed and activated successfully!" is displayed.
6.
Click Apply .
Notice
The activation key file can only be installed in the PBX with the MPR ID number entered when the activation
key file was downloaded. The activation key file cannot be reissued unless the mother board crashes.
Note
You can click the provided link to directly access activation key information and programme the number of
activated IP trunks and IP softphones.
32 Getting Started
4.1.3 Installing Additional Activation Keys