Panasonic KX-NCP500, User Manual

Page: 124 / 274

•
* If you do not enter an entry code when making the conference group call, extensions/outside
telephones can join the conversation without needing to enter an entry code.
•
Entry codes can consist of the digits "0" through "9". When " " is used for an entry code, no
one can join a conversation that is already in progress. For details, refer to "
Join After
Time Out".
•
A conversation can be established with a maximum of 8 parties (including the caller).
•
If the Hands-free Answerback feature is enabled, the called extension can answer the
conference group call without going off-hook.
•
If using an SLT, the caller can only originate a conference group call and cannot control the
called parties’ call status manually.
For a caller
To end a conversation with a specific party
PT/PS
To end a conversation with a specific party
During a conversation
(DSS)
Press DSS .
To end a conversation with the party who
joined the conversation last
Press TRANSFER .
TRANSFER
To disconnect the party who joined the
conversation last from the conference group call
Press FLASH/RECALL .
FLASH/
RECALL
•
In this case, the FLASH/RECALL button must be set to Flash/Recall mode through system
programming.
Broadcast Mode
If this mode is selected through system programming, the caller can call multiple parties in a conference group,
make a voice announcement, and then establish a multiple party conversation with the called parties. This
conversation will be heard by all called parties. Called parties can listen to the announcement simply by going
off-hook. They can send a notification tone if they want to join the conversation.
124 User Manual
1.7.3 Making a Conference Group Call