Panasonic KX-MB2000FR, Operating Instructions Manual

Page: 57 / 124

7.2 Viewing and calling back
using caller information
Important:
R If the area code of the received telephone number
is the same as yours, the area code may need to
be deleted before calling back. This may only
apply to some areas. To edit the number, see
page 57.
1
If the M Fax N light is OFF, turn it ON by pressing
M Fax N . A M Caller ID N
2
Press MCN to search from the recently received caller
information.
R If you press MDN , the display order will be
reversed.
R To send a fax, see page 43.
To change the way caller information is displayed
While displaying the desired caller information, press
M Caller ID N repeatedly to change name/telephone
number information.
7.2.1 Symbols and operations for caller
information
What “ ” means
“ ” on the display means the call has already been
viewed or answered.
To stop viewing
Press M Stop N .
7.3 Editing a caller’s telephone
number before calling back/
storing
R Make sure that the M Fax N light is ON.
1
M Caller ID N
2
Press MCN or MDN to display the desired item.
3
Press M Caller ID N to display the telephone number.
4
Press dial key (0 to 9) or MGN to enter the editing
mode and edit the telephone number.
R To send a fax, see page 43.
Note:
R The edited telephone number will not be saved in the
caller information. To save in the phonebook, see
page 57.
To correct a mistake
1.
Press MFN or MEN to move the cursor to the incorrect
number.
2. Press M Stop N to delete the number.
3. Enter the correct number.
To delete a number
Press MFN or MEN to move the cursor to the number you
want to delete and press M Stop N .
7.4 Erasing caller information
7.4.1 Erasing all caller information
1
Press M Menu N repeatedly to display “
CALLER
SETUP
” . A M Set N
R “
CALL LIST ERASE
” will be displayed.
2
M Set N .
R To cancel erasing, press M Stop N , then M Menu N .
3
M Set N A M Stop N
7.4.2 Erasing specific caller information
R Make sure that the M Fax N light is ON.
1
M Caller ID N
2
Press MCN or MDN repeatedly to display the desired
item. A MFN A M Set N A M Stop N
7.5 Storing caller information
7.5.1 Into the one-touch dial feature and
phonebook
R Make sure that the M Fax N light is ON.
1
M Caller ID N
2
Press MCN or MDN repeatedly to display the desired
item.
3
M Menu N
4
Select the station key or phonebook.
For station 1–2:
1.
Press the desired station key.
2. Press MCN or MDN repeatedly to select “
DIAL
MODE
” . A M Set N A M Set N
For station 3:
Press the station key. A M Set N
For station 4–6:
Press M Lower N , then press the desired station key.
A M Set N
For phonebook:
Press MFN or MEN . A M Set N
5
M Set N
Note:
R To edit a name or number, see page 45.
R If you assign an item to a station key which already
contains an item, the previous item will be replaced.
57
7. Caller ID (KX-MB2025/KX-MB2030 only)