•
If you prefer, you can cut the other side of the cable cover and run the cables through that open-
ing. For safety reasons, smooth the cut edges.
•
When there are too many cables to fully slide in the the cable cover, leave the cable cover slid
open, and tighten the screws with the cable cover in that position.
CAUTION
For safety reasons, fix the front cover and cable cover of the PBX with screws.
3.2.7 Placing the PBX on a Desktop
When placing the PBX on a desktop, make sure to follow these instructions.
WARNING
Be careful not to drop any components. Dropping components may damage them or cause an injury.
CAUTION
•
When the PBX is placed on a desktop, make sure that the PBX is placed as indicated in the diagram
below. Do not place it on its side or upside down.
•
Do not block the openings of the PBX. Allow space of at least 20 cm (8 in) above and 10 cm (4 in) at
the sides of the PBX.
3.2.7 Placing the PBX on a Desktop
52
