background image

 

This device complies with Part 15 of the FCC 

Rules. Operation is subject to the following 

two conditions: (1) This device may not cause 

harmful interference, and (2) this device must 

accept any interference received, including 

interference that may cause undesired 

operation. Privacy of communications may 

not be ensured when using this device. 

FCC RF Exposure Warning: 

NOTE: 

This equipment has been tested and found to 

comply with the limits for a Class B digital 

device, pursuant to Part 15 of the FCC Rules. 

These limits are designed to provide 

reasonable protection against harmful 

interference in a residential installation. This 

equipment generates, uses, and can radiate 

radio frequency energy and, if not installed 

and used in accordance with the instructions, 

may cause harmful interference to radio 

communications. However, there is no 

guarantee that interference will not occur in a 

particular installation. If this equipment does 

cause harmful interference to radio or 

television reception, which can be 

determined by turning the equipment off and 

on, the user is encouraged to try to correct 

the interference by one or more of the 

following measures:– Reorient or relocate the 

receiving antenna.– Increase the separation 

between the equipment 

and receiver.– Connect the equipment into 

an outlet on a 

circuit different from that to which the 

receiver is connected.– Consult the dealer or 

an experienced radio/ TV technician for help.

Protecting your recordings

• Do not remove the microSD card or 

disconnect the product’s AC adaptor while 

reading or writing data to the microSD card. 

Data on the card could become corrupted.

• If a microSD card malfunctions or is exposed 

to electromagnetic waves or static electricity, 

data on the card could become corrupted or 

erased. Therefore we recommend backing up 

Some devices operate at frequencies that 

may cause interference to nearby TVs and 

VCRs. To minimize or prevent such 

interference, this device should not be placed 

near or on top of a TV or VCR. If interference is 

experienced, move this device further away 

from the TV or VCR. This will often reduce or 

eliminate interference. 

FCC and other information

FCC

Any changes or modifications not expressly 

approved by the party responsible for 

compliance could void the user’s authority to 

operate this device. 

CAUTION: 

• This product complies with FCC radiation 

exposure limits set forth for an uncontrolled

environment. 

• To comply with FCC RF exposure 

requirements, the device must be installed 

and operated 20 cm (8 inches) or more 

between the product and all person’s body. 

• This product may not be collocated or 

operated in conjunction with any other 

antenna or transmitter. 

Notice:

• FCC ID can be found on the bottom of the 

unit.

Important safety instructions

When using your product, basic safety 

precautions should always be followed to 

reduce the risk of fire, electric shock, and 

injury to persons, including the following: 

1 Do not use this product near water for 

example, near a bathtub, washbowl, kitchen 

sink, or laundry tub, in a wet basement or 

near a swimming pool.

2 Use only the power cord indicated in this

document. 

SAVE THESE INSTRUCTIONS

Summary of Contents for KX-HN1053

















Reviews: