Panasonic KX-HN1007, Installation Manual

Page: 20 / 40

n Outdoor camera (KX-HN7002/KX-HN7003/KX-HN1007)
A
G
J
H
B
D
E
F
N
M
L
K
I
C
A White LED lens H Speaker
B Lens I
M SETUP N button
*1
C Infrared sensors J Power slide switch
D LED indicator K Charging LED
E Microphone L Camera nut
F Light sensor M
USB cover/connection
*2
G Interface cover N Wall mounting adaptor
*1 Used when performing initial setup.
*2 Used to connect the USB cable when charging.
LED indicators
You can use the LED indicators to confirm the status of the cameras.
Indicator Status
Off No power, or LED indicator is turned off
Green or red, blinking quickly - off
for 1 second Camera is on
Amber, lit Power on until start up completed, or not registered to the
access point
Green, lit Registration successfully completed or signal level is strong
Green, blinking quickly Camera is searching for an access point
Red, lit
Registration failed, signal level is weak
*1
, or detecting
motion
Red, blinking quickly Streaming data
20 For assistance, please visit http://shop.panasonic.com/support
Setup
HN7001̲(en̲en)̲1228̲ver.030.pdf 20 2017/12/28 16:21:53