43
PROVISIONING – UPGRADE AND CONFIGURATION
<registrar>
This is the URL to be put in the request URI for the registration.
SXEOLVKBHQDEOHG!
,IWKLVÀDJLVVHWWKHSUHVHQFHLQIRUPDWLRQRIWKLVDFFRXQWZLOOEHSXEOLVKHG
to the server where the account belongs.
LQLWLDOBDXWK!
,IWKLVÀDJLVVHWWKHDXWKHQWLFDWLRQFOLHQWIUDPHZRUNZLOOVHQGDQHPSW\
Authorization header in each initial request.
<initial_algo />
Specify the algorithm to use when empty Authorization header is to be
sent for each initial request (see above).
<pidf_tuple_id />
Optional PIDF tuple ID for outgoing PUBLISH and NOTIFY. If this value is
QRWVSHFL¿HGDUDQGRPVWULQJZLOOEHXVHG
<force_contact />
Optional URI to be put as Contact for this account. It is recommended that
WKLV¿HOGLVOHIWHPSW\VRWKDWWKHYDOXHZLOOEHFDOFXODWHGDXWRPDWLFDOO\
based on the transport address.
<require_100rel>
Specify whether support for reliable provisional response (100rel and
PRACK) should be required for all sessions of this account.
SUR[\BXUL!
2SWLRQDO85,RIWKHSUR[LHVWREHYLVLWHGIRUDOORXWJRLQJUHTXHVWVWKDWDUH
using this account (REGISTER, INVITE, etc).
<reg_timeout>
Optional interval for registration, in seconds. If the value is zero, default
interval will be used.
<cred>
Array of credentials. Normally, if registration is required, at least one
FUHGHQWLDOVKRXOGEHVSHFL¿HGWRVXFFHVVIXOO\DXWKHQWLFDWHWKHVHUYLFH
SURYLGHU0RUHFUHGHQWLDOVFDQEHVSHFL¿HGIRUH[DPSOHZKHQLWLV
H[SHFWHGWKDWUHTXHVWVZLOOEHFKDOOHQJHGE\WKHSUR[LHVLQWKHURXWHVHW
<realm>
Realm. Use “*” to make a credential that can be used to authenticate any
challenges.
<scheme />
Scheme (e.g. “digest”).
<username>
Authentication name
FUHGBGDWDBW\SH!
7\SHRIGDWDIRUSODLQWH[WSDVVZRUG
FUHGBGDWD!
7KHGDWDZKLFKFDQEHDSODLQWH[WSDVVZRUGRUDKDVKHGGLJHVW
<auto_update_nat>
This option is useful for keeping the UDP transport address up to date
with the NAT public mapped address. When this option is enabled and
6781LVFRQ¿JXUHGWKHOLEUDU\ZLOONHHSWUDFNRIWKHSXEOLF,3DGGUHVV
from the response of REGISTER request. Once it detects that the address
has changed, it will unregister current Contact, update the UDP transport
address and register a new Contact to the registrar.
<ka_interval>
Set the interval for periodic keep-alive transmission for this account. If
this value is zero, keep-alive will be disabled for this account. The keep-
alive transmission will be sent to the registrar’s address after successful
registration.
<ka_data />
Specify the data to be transmitted as keep-alive packets. Default: CR-LF.
<use_srtp>
Specify whether secure media transport should be used for this account.
0: SRTP will be disabled and the transport will reject RTP/SAVP offer.
1: SRTP will be advertised as optional and incoming SRTP offer will be
accepted.
2: The transport will require that RTP/SAVP media is used.
