42
PROVISIONING – UPGRADE AND CONFIGURATION
<require_100rel>
Specify whether support for reliable provisional response (100rel and
PRACK) should be required by default. Note that this setting can be
IXUWKHUFXVWRPL]HGLQDFFRXQWFRQ¿JXUDWLRQ
<use_srtp>
Specify default value of secure media transport usage. Note that this
VHWWLQJFDQEHIXUWKHUFXVWRPL]HGLQDFFRXQWFRQ¿JXUDWLRQ
0: SRTP will be disabled, and the transport will reject RTP/SAVP offer.
1: SRTP will be advertised as optional and incoming SRTP offer will be
accepted.
2: The transport will require that RTP/SAVP media shall be used.
<srtp_secure_signaling>
Specify whether SRTP requires secure signalling. This option is only used
when use_srtp option above is non-zero. Note that this setting can be
IXUWKHUFXVWRPL]HGLQDFFRXQWFRQ¿JXUDWLRQ
0: SRTP does not require secure signalling
1: SRTP requires secure transport such as TLS
2: SRTP requires secure end-to-end transport (SIPS)
<codec>
<type>
Codec type
<name>
Codec name
<prio>
Codec priority (0-4)
<dtmf>
DTMF signalling. Default is 2.
0: In-band
1: SIP message
2: RTP message
<no_vad>
Disable VAD. Default is VAD enabled.
<ec_tail>
Echo canceller tail length, in milliseconds.
<enable_ice>
Enable ICE?
<enable_relay>
Enable ICE relay?
<enable_presence>
Enable the use of presence signalling.
<tls>
<tls_password />
Password for the private key
<tls_method>
TLS protocol method from pjsip_ssl_method, which can be:
0: TLS v1.0
1: TLS v1.1
2: TLS v1.2 (Default)
WOVBYHULI\BVHUYHU!
9HULI\VHUYHUFHUWL¿FDWH
WOVBYHULI\BFOLHQW!
9HULI\FOLHQWFHUWL¿FDWH
WOVBUHTXLUHBFOLHQWBFHUW!
5HTXLUHFOLHQWFHUWL¿FDWH
<tls_neg_timeout>
TLS negotiation timeout in seconds to be applied for both outgoing and
incoming connections. If zero, no timeout is used.
<account>
<valid>
If this account information is valid or not.
QDPH!
8VHUGH¿QHGQDPHRIWKHDFFRXQW
<id>
The full SIP URL for the account.
