Panasonic KX-HDV330 Operating Instructions Manual Download Page 26

Page: 26 / 88

Adjusting the Volume

Adjusting the Receiver/Speaker/Headset Volume

1. Press [

]/[

] volume key: Adjust the volume during a conversation.

Note

Both receiver volume and headset volume are adjusted in training mode. See “Training Mode”,
Page 34.

Adjusting the Ringer Volume or Turning the Ringer Off
[In standby mode]

1. Press [

]/[

] volume key: Adjust the ringer volume.

2. Tap "OK".

Note

For details about setting the ringer pattern, see “Incoming Option”, Page 67.

Adjusting the Ringer Volume or Turning the Ringer Off while Ringing

While receiving a call, do the following to adjust the ringer volume or turn the ringer off:

Note

If you attach a headset while receiving an incoming call, ringing will be heard from the speaker.

To adjust the ringer volume

1. Press [

]/[

] volume key: Adjust the ringer volume.

Note

The adjusted volume level will also be used for subsequent calls.

The volume can also be adjusted in the pop-up window.

To turn the ringer off

1. Tap

Incoming/Outgoing Call Log

Displaying the Incoming/Outgoing Call Log
[In standby mode]

1. Tap

"Call History"

2. Missed Call Log: Tap

Incoming Call Log: Tap

Outgoing Call Log: Tap

Making a call using the Incoming/Outgoing Call Log

See “Using the Incoming/Outgoing Call Log”, Page 31.

Storing an item using the Incoming/Outgoing Call Log

See “Storing an Item Using the Incoming or Outgoing Call Log”, Page 42.

Before Operating the Telephones

Summary of Contents for KX-HDV330

























































































Search results

Summary of Contents for KX-HDV330

Reviews:

Related manuals for KX-HDV330

Brands by name

Popular brands

Panasonic KX-HDV330, Operating Instructions Manual

Search results

Summary of Contents for KX-HDV330

Reviews:

Related manuals for KX-HDV330

Brands by name

Popular brands