Panasonic KX-HDV330 Operating Instructions Manual Download Page 62

Page: 62 / 88

Wall Mounting

The KX-HDV330 and up to 5 optional KX-HDV20 units can be mounted on a wall.

IMPORTANT

Make sure that the wall and the fixing method are strong enough to support the weight of the unit. (See
“Specifications”, Page 76.)

1. Insert the tabs of the wall mounting adaptor into the designated openings in the base, and then slide

the wall mounting adaptor in the direction of the arrow until it clicks.

KX-HDV330

With optional KX-HDV20

For 2nd to 5th KX-HDV20

Remove the screw from the DSS cover of the KX-HDV20, and then slide the cover up to remove it.

2. Fasten the wall mounting adaptor to the base with the included small screw.

(Recommended torque: 0.4 N·m [4.08 kgf·cm/3.54 lbf·in] to 0.6 N·m [6.12 kgf·cm/5.31 lbf·in])

3. Connect the AC adaptor, handset cord, Ethernet cables, and connection cable as necessary.
4. Drive the large screws into the wall either 83 mm (3 1/4 in) or 100 mm (3 15/16 in) apart, and mount

the unit on the wall.

Installation and Setup

Summary of Contents for KX-HDV330

























































































Search results

Summary of Contents for KX-HDV330

Reviews:

Related manuals for KX-HDV330

Brands by name

Popular brands

Panasonic KX-HDV330, Operating Instructions Manual

Search results

Summary of Contents for KX-HDV330

Reviews:

Related manuals for KX-HDV330

Brands by name

Popular brands