manualshive.com logo in svg

Panasonic KX-HDV230, Administrator'S Manual, Page: 81 / 342

Share
Download
Panasonic KX-HDV230 Administrator'S Manual Download Page 81

Auto DNS via DHCP

Description

Selects whether to enable or disable the DNS server obtained by
DHCPv6.

Note

•

This setting is available only when 

[Connection Mode]

 is set

to 

[DHCP]

.

Value Range

•

Yes: Use DNS obtained by DHCPv6

•

No: Not use (use static DNS)

Default Value

Yes

Configuration File Reference

DHCP_DNS_ENABLE_IPV6 (Page 190)

DNS1

Description

Specifies the IP address of primary DNS server for IPv6.

Value Range

Max. 39 characters
n:n:n:n:n:n:n:n [n=0-FFFF, abbreviation available]

Default Value

Not stored.

Configuration File Reference

USER_DNS1_ADDR_IPV6 (Page 190)

DNS2

Description

Specifies the IP address of secondary DNS server for IPv6.

Value Range

Max. 39 characters
n:n:n:n:n:n:n:n [n=0-FFFF, abbreviation available]

Default Value

Not stored.

Configuration File Reference

USER_DNS2_ADDR_IPV6 (Page 190)

4.3.2  Ethernet Port Settings

This screen allows you to change the connection mode of the Ethernet ports, LLDP and the VLAN settings.

Document Version  2015-07  

Administrator Guide

81

4.3.2 Ethernet Port Settings

Summary of Contents for KX-HDV230























































































































































































































































































































































Reviews:

No comments