manualshive.com logo in svg

Panasonic KX-HDV230, Administrator'S Manual, Page: 336 / 342

Share
Download
Panasonic KX-HDV230 Administrator'S Manual Download Page 336

7.4  Upgrade Firmware

When an updated version of the firmware is provided on a Web site or other means, you can perform the
firmware update manually using Web user interface programming.
For details about the manual firmware update, see 

4.7.3  Upgrade Firmware

.

To manually update the firmware
1.

In the Web user interface, click the 

[Maintenance]

 tab, and then click 

[Upgrade Firmware]

.

2.

Click 

Browse

, select the folder where the firmware file is stored, and specify the firmware file on your PC.

3.

Click 

[Upgrade Firmware]

.

336

Administrator Guide

Document Version  2015-07  

7.4 Upgrade Firmware

Summary of Contents for KX-HDV230























































































































































































































































































































































Reviews:

No comments