manualshive.com logo in svg

Panasonic KX-HCM8 - Network Camera - Position, Operating Instructions Manual

Share
Download
Panasonic KX-HCM8 - Network Camera - Position Operating Instructions Manual Download Page 95

Operating Instructions

[For assistance, please call: 1-800-272-7033]                                 95

4.4

Maintenance

To keep Network Camera functioning in good condition, maintenance plays an 
important part. Keep maintenance when using Network Camera. After removing 
dust from the Fixed Focus Lens, wipe the Fixed Focus Lens with lens cleaning 
paper.

Fixed Focus Lens

•

Do not forcedly move the lens part around the Fixed Focus Lens. Touching 
it may damage the Pan/Tilt motor.

•

Do not touch the Fixed Focus Lens. Touching it may leave a fingerprint and 
can cause the image to be out of focus, and may also remove the protective 
coating from the Fixed Focus Lens.

•

Clean the Fixed Focus Lens with lens cleaning paper.

Fixed Focus Lens

Lens cleaning 
paper

Summary of Contents for KX-HCM8 - Network Camera - Position























































































































Reviews:

No comments

Brands by name

Popular brands

Load more brands