Panasonic KX-HCM8 - Network Camera - Position, Operating Instructions Manual

Page: 23 / 118

Operating Instructions
[For assistance, please call: 1-800-272-7033] 23
How to refer the network parameters from the PC
If you cannot get the network parameters, you can refer to the network parameters
except for IP address from the PC on the same network in the following procedure.
• When using Windows 95, Windows 98 or Windows Me
1.
Click [Start] –> [Run...]. Run window appears.
These steps are slightly different depending on the operating system.
2.
Enter "winipcfg" and click [OK]. IP configuration window appears.
3.
Select the proper Ethernet adaptor and click [More Info].
4.
Click [OK] to close IP Configuration window.
• When using Windows NT, Windows 2000 or Windows XP
1.
Click [Start] –> [Program] (–> [Accessories]) –> [MS-DOS
®
(Command)
Prompt]. MS-DOS Prompt window opens. These steps are slightly different
depending on the operating system.
2.
Enter "ipconfig /all" and press [Enter].
3.
Enter "exit" and press [Enter] to close the window.