![background image](http://html1.mh-extra.com/html/panasonic/kx-hcm8-network-camera-position/kx-hcm8-network-camera-position_operating-instructions-manual_4164928076.webp)
Operating Instructions
76
3.5.9
Multi-Camera
Multi-Camera window enables the setting of Multi-Camera screen. Camera
Name and IP address of each Network Camera must be entered to view the Multi-
Camera screen. Registering IP addresses of the other Network Camera enables
you to view on the Multi-Camera screen. Clicking Camera Name of Network
Camera on the Multi-Camera screen accesses the Single Camera screen to
control the image. First Network Camera is named on Name/Time window on
page 54. 2nd to 4th Network Cameras are named on this Multi-Camera window.
Notes
•
When using the Multi-Camera screen, all additional Network Cameras
must be defined on each Multi-Camera window. This will allow all Network
Cameras to be seen and selected from each Network Camera in the entire
network.
•
Global IP address is required to view the image over the Internet.
1.
Click [Multi-Camera] on Setup Page.
Summary of Contents for KX-HCM8 - Network Camera - Position
