7
Network Camera Mounting
Four mounting methods are shown in the following figures. Please confirm the top and bottom of the
Network Camera when mounting.
1)
Attach the Network Camera by screwing the threaded
mount into the tripod mounting hole.
2)
Turn the grip to fix the Flexible Stand firmly.
Flexible Stand Mounting
1)
Mount the Flexible Stand firmly to the wall or the beam using the three screws (accessories). Please set the Flexible Stand
165 mm away from the ceiling.
2)
Attach the Network Camera by screwing the threaded mount into the tripod mounting hole. Mounting
hole on the rear side is also available.
3)
Adjust the position of the Network Camera and secure the Flexible Stand firmly.
4)
Roll up the cables and Flexible Stand with the Self Bonding tape (accessories).
Wall Mounting
Attach the Network Camera to the tripod by using the tripod bolt.
Tripod Mounting
Tripod
mounting
hole
Tripod
mounting
hole
•
Please use proper screws fit for the material of the wall.
1)
2)
3)
4)
Caulk around Flexible
Stand if you need
Self Bonding tape
Please waterproof
the rest of the cable.
165 mm
1)
2)
