32
Sending Faxes
1
Insert the document FACE DOWN.
●
If necessary, press
repeatedly to select the desired setting
(p. 26).
2
Rotate
until the following is
displayed.
Display:
3
Press .
4
Rotate
until the desired name
is displayed.
Example:
5
Press .
●
To program other stations, repeat steps 4
and 5 (up to 20 stations).
6
Press
after programming all
of the desired stations.
●
The document will be fed into the unit and
scanned into memory. The unit will then
transmit the data to each station, calling
each number sequentially.
●
After transmission, the stored document will
be erased automatically, and the unit will
automatically print a broadcast sending
report (p. 35).
FAX START
DIR=Bill
[001]
SET
Bill
[000]
JOG DIAL
DIR=
[000]
SET
<ONE TIME BROAD>
JOG DIAL
RESOLUTION
FACE DOWN
JOG DIAL
STOP
SET
Display
FAX START
RESOLUTION
One time broadcast transmission
!
This feature is useful for sending the same document to selected parties whose fax numbers are
stored in the JOG DIAL directory. If you only wish to send a document once, select the parties
for each transmission.
Before programming, make sure that the desired stations have been stored in the JOG
DIAL directory (p. 20).
Note:
●
If you select the “FINE”, “SUPER FINE” or
“HALF TONE” resolution, the number of
pages that the unit can transmit will decrease.
●
If one of the stations is busy or does not
answer, the station will be skipped. All
skipped stations will be redialed up to 2 times
after all of the other stations have been
called.
To cancel the broadcast setting
1. Press
while the unit displays the following
message.
Display:
●
The display will show the following.
2. Press .
SET
YES:SET/NO:STOP
SEND CANCELED?
BROADCASTING
STOP
KX-FP80 (032-035) 00.2.21 9:46 AM Page 32
