Panasonic KX-FP200 Operating Instructions Manual Download

Page: 68 / 80

Insert the blue gear into the blue core of the
new film.

Insert the three green gears into the remaining
cores of the new film.

Guide tabs

Blue gear

Blue core

Slots

Guide tabs

Green gears

Slots

Insert the film into the cartridge so that the blue
gear matches the blue label on the cartridge.

Lock the four gears of the film by (

) pushing

back the top side gears and (

) pulling the

bottom side gears forward until they lock into
place.

If the film is slack, tighten it by winding the
bottom side gears.

Insert the film cartridge by matching the blue
label on the cartridge with that on the unit.

Close the front cover securely by pushing down
on both ends.

The unit will check the film is set correctly and
the following message will be displayed.

Display:

If the following message is displayed, the film
is not correctly inserted in the cartridge.

Reinsert it correctly.

CHECK FILM

PLEASE WAIT

Film

Cartridge

Blue gear

Blue label

Top side gear

Top side
gears

Bottom
side gears

Bottom
side gear

Blue labels

Film
cartridge

Incorrect

Correct

tight

Replacing the film or film cartridge

(cont.)

Summary of Contents for KX-FP200

















































































Search results

Summary of Contents for KX-FP200

Reviews:

Related manuals for KX-FP200

Brands by name

Popular brands

Panasonic KX-FP200, Operating Instructions Manual

Search results

Summary of Contents for KX-FP200

Reviews:

Related manuals for KX-FP200

Brands by name

Popular brands