Panasonic KX-FP181 Operating Instructions Manual Download

Page: 88 / 94

Specifications

* Transmission speed depends upon the contents of the pages,

resolution, telephone line conditions and capability of the other
party’s machine.

** Transmission speed mentioned here is based upon the ITU-T

No. 1 Test Chart and original mode.
If the capability of the other party’s machine is inferior to your
unit, the transmission time may be longer.

*** Recording time may be reduced by the calling party’s

background noise.

Note:

●

Any details given in these instructions are subject to change without
notice.

●

The pictures and illustrations in these instructions may vary slightly from
the actual product.

ITU-T No. 1 Test Chart

Technical data about this product

Applicable Lines:

Public Switched Telephone Network

Document Size:

Max. 216 mm in width / Max. 600 mm in length

Effective Scanning Width: 208 mm
Recording Paper Size:

A4: 210 mm x 297 mm

Effective Printing Width:

202 mm

Transmission Time*:

■

KX-FP181: Approx. 12 s/page (Original mode)**

■

KX-FP185: Approx. 8 s/page (Original mode)**

Scanning Density:

Horizontal: 8 pels/mm
Vertical: 3.85 lines/mm –“STANDARD” mode

7.7 lines/mm –“FINE”/“HALF TONE” mode
15.4 lines/mm –“SUPER FINE” mode

Halftone Level:

64-level

Scanner Type:

Contact Image Sensor (CIS)

Printer Type:

Thermal Transfer on plain paper

Data Compression System: Modified Huffman (MH), Modified READ (MR), Modified Modified

READ (MMR)

Modem Speed:

■

KX-FP181: 9,600 / 7,200 / 4,800 / 2,400 bps; Automatic Fallback

■

KX-FP185: 14,400 / 12,000 / 9,600 / 7,200 / 4,800 / 2,400 bps;

Automatic Fallback

Operating Environment:

5 °C – 35 °C, 20 % – 80 % RH (Relative Humidity)

Dimensions (H x W x D):

185 mm x 345 mm x 276 mm

Mass (Weight):

Approx. 3.75 k

Power Consumption:

Standby:

■

KX-FP181: Approx. 5 W

■

KX-FP185: Approx. 6 W

Transmission: Approx. 20 W
Reception:

Approx. 40 W (When receiving a 20% black document)

Copy:

Approx. 40 W (When copying a 20% black document)

Maximum:

Approx. 120 W (When copying a 100% black document)

Power Supply:

220–240 V AC, 50 Hz

Memory Capacity:

Voice memory (KX-FP185 only): Approx. 18 minutes of recording

time including greeting message***

Fax memory: Approx. 28 pages of memory reception

Approx. 25 pages of memory transmission

(Based on the ITU-T No. 1 Test Chart in standard resolution,

without using the Error Correction Mode.)

Summary of Contents for KX-FP181































































































Search results

Summary of Contents for KX-FP181

Reviews:

Related manuals for KX-FP181

Brands by name

Popular brands

Panasonic KX-FP181, Operating Instructions Manual

Search results

Summary of Contents for KX-FP181

Reviews:

Related manuals for KX-FP181

Brands by name

Popular brands